# Integrate diyHue and Conbee 2 **URL:** \ **Category:** Support\ **Created:** [March 6, 2021, 1:00am UTC](https://diyhue.discourse.group/t/integrate-diyhue-and-conbee-2/272 "2021-03-06T01:00:34Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![FVerhamme](https://avatars.discourse-cdn.com/v4/letter/f/838e76/32.png) [@FVerhamme](https://diyhue.discourse.group/u/FVerhamme)\ **Post date:** [March 6, 2021, 1:00am UTC](https://diyhue.discourse.group/t/integrate-diyhue-and-conbee-2/272/1 "2021-03-06T01:00:34Z")
Hello everybody, I’m really new to diyHue and Conbee. I read that they both work together but currently not for me. I had a Raspberry Pi 4B and I installed the diyHue as a docker container that is on IP Address 192.168.111.225 from where I can reach the diyHue website. Then I plug in a conbee 2 usb stick and followed the instructions on the conbee website. The installation process finished without errors and the phoscon website is available on 192.168.111.4 Port 8080! On my mobil device I installed HUE Essentials where both (diyHue and Phoscon) will be listed as bridges. But I only can add one at a time! I paired 2 lamps via the phoscon website and when I connect the HUE Essentials to the Phoscon Bridge I can controll them. That means, in general the zigbee works. But how can I add the conbee (or phoscon) with diyHue. I searched this group but the articles found are to technical for me. Can someone assist me in bringing the both together so I can controll the lamps over diyHue? Thanks in advanced Frank ---
**Author:** ![ryan780](https://yyz2.discourse-cdn.com/free1/user_avatar/diyhue.discourse.group/ryan780/32/9_2.png) [@ryan780](https://diyhue.discourse.group/u/ryan780)\ **Post date:** [March 9, 2021, 9:58pm UTC](https://diyhue.discourse.group/t/integrate-diyhue-and-conbee-2/272/2 "2021-03-09T21:58:38Z")
Did you follow these instructions: [https://diyhue.readthedocs.io/en/latest/lights/raspbee.html](https://diyhue.readthedocs.io/en/latest/lights/raspbee.html)